Wheel alignment is basically adjusting the wheels so that they are parallel
to each other and perpendicular to the ground. This increases the life of the
Tyres and makes a journey safe because if wheels are not aligned then the Car
will move in left or right directions which can lead to some major accidents.
Wheel aligning is a process in which caster, camber and toe of the cars are adjusted, famous type of wheel alignment is 04 wheel alignment caster determines the tilt of the steering. The camber determines the tilt of wheels. The toe determines that how much front wheels are inward.
It is always recommended to have alignment from a specialized mechanic. The procedure of doing the right wheel alignment I as follows:
 |
| Wheel Alignment Machine |
Wheel aligning is a process in which caster, camber and toe of the cars are adjusted, famous type of wheel alignment is 04 wheel alignment caster determines the tilt of the steering. The camber determines the tilt of wheels. The toe determines that how much front wheels are inward.
It is always recommended to have alignment from a specialized mechanic. The procedure of doing the right wheel alignment I as follows:
1. Front
wheels must be raised with the help of a Jack.
2. Look
one wheel at a time. In that looking try to rectify which side wheel is
pointing. If it is pointing towards the centre of the Car then the outer Tyre
rod needs to be tightened but if it is pointing outward then the rod needs to
be loosened.
3. To
tight the rods first of all loosen the nuts which connect the inner and outer
rod.
4. After
doing all adjustments again look at the wheel from front end to check that is
it still tilting in the wrong direction or not. After completion of this
process with the 01 wheel try the same process for the remaining wheels.
ARTICLE BY:
Useful information shared on wheel alignment and balancing. One can also get the details of bridgestone tyres shop in sinhgad road only at Shree Tyres.
ReplyDelete